How to fix a toilet DIY

When a toilet begins to leak it can cause other problems within your bathroom including damage to your flooring or even the sub flooring depending how long the water has sat there. It can even destroy the ceiling and the frame work you have. Most times these sneaky leaks come from the fill valve or flush valve, but on a very rare case though it starts with cracks in the hairline tank.

These Challenges you could face with the toilet might have you replace the tank or in a worst case scenario replace the toilet all together. The Toilet Repair you might have to do depends on the leaks that I mentioned earlier. If its worst case scenario it might cost you some money to either replace the whole toilet or have somebody come out and fix the problem at hand.

How to Repair Copper Pipe

Unbelievable is the best way to describe this new age of DIY Plumbing. When the last time about a year ago we got the call for something to do with a leak, in which we discovered although we could not see it, that a copper line some how developed a pin hole mini misting leak. Inside the wall underneath the tub it was there and it was producing moisture all the while black mold with many a little creature making homes nearby. This particular leak would have only been accessible had the tub and tile been demo'ed out of the way or on the other side of the wall in the kitchen, granite top as well as a portion of the lower cabinetry dismantled and installed again, now getting into the $ 2000.00 US range!

After a few calls and an extensive conversation with the home owner at the time, we came upon a newer line of fittings and figured if we can get one hand on the pipe we were able to cut, sand any burrs and push on the product sold to us that could keep this job near $200.00 US , well it would be at least worth a try!

Within minutes we had the water back on and a dry hand testing and testing until we were convinced that this newfangled plumbing fitting has just revolutionized the art of sweating/soldering copper plumbing forever. You CAN DO IT!

DIY Leak Test your House

In determining a leak in your system, the only absolute sure way for a decision to be made here, is to go straight to the source. The water service meter to your house monitors every drop that passes the gauge. When pouring a concrete slab foundation, the plumbing lines are re trenched and placed in the ground prior to the concrete pour, as time progresses there is often several things that may have to occur or end up going wrong.
A visual inspection of the outside of your residence may aide in any abnormalities IE., wet areas near the exterior perimeters, higher than usual water bills, interior mold stench, warm places beneath the flooring etc. If you are experiencing any of these common issues, then before calling a plumbing contractor and getting invoiced for the trip, a final DIY leak test can be performed.
Turn off any and all appliances, dishwasher or washing machine. Check any and all the sinks faucets to be sure they are 100% in the off position. If any toilet is running because of needed repairs, then shut off their angle stop or (supply line) and if you are not alone then tell everyone else to please wait on flushing any toilets or washing any hands.

It is now time to find your water meter, typically on or near the street or curb. In the front of the property and in the ground. If you are absolutely positive that all fixtures/machines and spigots are off then the meter should not be moving/counting or digitally calculating the city or counties water passing through it. Chances are that this has assisted you in DIY leak detection.